

DetectMASTER i9 (Table top)
Table Top Needle Detection Machine for Socks & Undergarments
Detect MASTER i9 (Table top) consists of sensors fitted along length (Centre Line) of the machine under the top platform. The two light indicators fitted on the left and right side have been provided for visual indication as they glow if there is any iron
With Paramount you're always in safe hands with our
Lifetime Buyback Warranty


Detect MASTER i9 (Table top) consists of sensors fitted along length (Centre Line) of the machine under the top platform. The two light indicators fitted on the left and right side have been provided for visual indication as they glow if there is any iron particle. A buzzer (for sound) is also fitted inside the machine. To control the sensitivity, there is a 10 step less volume control knob in the equipment.Whenever any garment is moved on the top surface of the machine, then the unit senses for any iron particle or needle. If the garment is free from any broken needle pieces, then the machine indicators do not glow, and the buzzer doesn’t activate. In case any broken needle pieces present in any garment then the two indicators glows (on both sides) and buzzer sounds. A very useful equipment for Socks, undergarment & other smaller articles to check for any broken needle. The Detect MASTER i9(Table top) works on the magnetic induction principal. The equipment has a detecting width of 600 mm with an effective detecting height of 300 mm.

- Economical, Table Top, Needle Detection Machine.
- Extremely useful for small garments Up to 50mm Thickness.
- Portable in Size.
- Buzzer will sound on Detection of Iron Particles.
- Compact Design with Modern aesthetics.
- Complete with all accessories.
- Supplied with Conformance & Inspection Certificates.

Power Supply | 220/230 V, 50 Hz, single Phase,50/60 Hz, AC Supply |
Sensitivity | 1.2 mm |
No. of detecting sensor | 9 No’s |
Control of Sensitivity | 10 step less control |
No. of visual light indicators | 2 No’s |
Alarm Sound | A buzzer sound gives sound signal at the detection of an iron part |
Power Required | 220V, 50 Hz, Single phase AC |
Power Consumption | 20W |
Overall Dimension of the unit | LENGTH x DEPTH x HEIGHT 685mm x 410mm x 75mm 27” x 16” x 3” |
Net weight | 7.5 kg (16.5 lb.) |
