Sharp Edge Tester
Next Generation Digital Sharp Edge Tester as per Safety and CE norms
Paramount Sharp Edge Tester i9 is a Next Generation Sharp Edge Tester adhering to Safety & CE Norms. It is used to ascertain that metal or glass edges on toys or any other article intended for use by children under 8 years of age does not..
With Paramount you're always in safe hands with our
Lifetime Buyback Warranty
OverviewSharp edge Tester is used to determine that any type of edges on Toys made of various
materials, does not hurt the Babies or Kids while they playing with them
Paramount Sharp Edge Tester i9 is a Next Generation Sharp Edge Tester adhering to Safety & CE Norms. It is used to ascertain that metal or glass edges on toys or any other article intended for use by children under 8 years of age does not cause any damage or risk by laceration to the child.
The test is conducted with a PTFE Tape to determine whether an edge is hazards for the infant.
RELATED STANDARDS:
EN 71-1
ASTM F963
16 CFR 1500
ISO 8124-1
GB 6675-2
Salient Features- Next Generation Sharp Edge Tester is used to determine whether metal or glass edges on toys
can cause any damage , injury or risk by laceration to the child. - This equipment does accurate testing in which a pressure sensitive self-adhesive PTFE Tape ( To simulate
human skin) is attached to a mandrel, which is then rotated for a single 360 degrees revolution, along the
assessable edge being tested. If the Tape is cut in half or longer in length (Approx. 13 mm) the edge is
identified as a hazardous sharp edge. - The Test Shaft ( Mandrel) is made of Steel and is duly Hardened.
- The maximum force vertically applied to the axis, when testing, should be 1.35 lb.
- The Test Shaft has the speed of 1.00 ± 0.08 inches per second.
- The Testing is done with the help of a Foot Pedal activated Switch.
- Supplied with Calibration Certificate (Traceable to NPL )
Tech. Specs.| Test Shaft ( Mandrel) Dia. | 9.53 ± 0.12 |
| Mandrel Hardness | > 40 HR |
| Rotating Speed | 1.00 ± 0.08 inches per second |
| Activation of Test | By Foot Pedal |
| Power Supply | 220 V, 50 Hz, Single Phase, AC |
| Weight4 Kg. (8.8 lb) | 4 Kg. (8.8 lb) |
| Dimensions | 300 x 200 x 200 mm 12” x 8” x 8” |
END USE
