

Taber Abrasion Tester i9 (Digital)
Advanced Taber Abrasion Tester for Accurate Results
Paramount Taber Abrasion Tester i9 (Digital) is an Advanced model Equipment to measure the wear resistance of material through Abrasion mounting a flat specimen approximately 100mm square or round to a turntable platform that
With Paramount you're always in safe hands with our
Lifetime Buyback Warranty


TABER Abrasion Tester is meant to perform accelerated wear testing. The Equipment is Capable of providing reliable data in a few minutes compared to the years that may be required by in-use testing, Abrasion Tester is used to test a wide spectrum of materials including plastics, coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.
Paramount Taber Abrasion Tester i9 (Digital) is an Advanced model Equipment to measure the wear resistance of material through Abrasion mounting a flat specimen approximately 100mm square or round to a turntable platform that rotates on a vertical axis at a fixed speed. The standard material thickness that can be evaluated with the Rotary Abraser is 6.35 mm (materials greater than 6.35 mm but less than 40 mm can be tested with optional accessories). Two abrasive wheels, which are applied at a specific pressure, are lowered onto the specimen surface. Characteristic rub wear action is produced by contact of the test specimen against the sliding rotation of the two abrading wheels. As the turntable rotates, the wheels are driven by the sample in opposite directions about a horizontal axis displaced tangentially from the axis of the sample. One abrading wheel rubs the specimen outward toward the periphery and the other, inward toward the center while a vacuum system removes loose debris during the test. The wheels traverse a complete circle on the specimen surface, revealing abrasion resistance at all angles relative to the weave or grain of the material .

- SATRA TM 163
- ASTM D3884
- ASTM D1175
- ASTM D4060
- TAPPI T476
- JIS K 7204
- DIN 52347

- To Determine the Wear Resistance of material thru Abrasion and also to measure the Wear resistance degree like Mass Loss, Thickness Loss etc.
- Highly suitable for Flat products like Suitcases, Carpet, Leather, Cardboard, glass, /plastics, traffic Paints, Automobile Interior etc.
- Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
- Precision Engineered components for continuous operations
- Adheres to National & International Standards

TAT-001 | Rotary Abrasion Tester |
Specimen | Φ 108mm,thickness 3mm |
Load | 250,500,1000g |
Grinding wheel | Φ 50.8mm, 12.7mm |
Space between wheels | 63.5mm |
Grinding wheel and Plate’s space | 37-38mm |
Grinding wheel | Φ out diameter 88.9mm, Inside diameter 63.5mm |
Rotating speed | 60r/min,72r/min |
Counter | LCD.0- 999.999 |
Distance in specimen | 3mm |
Overall Dimensions | 55x32x32cm |
Weight | 20kg |
